![]() |
|
|
Product Details:
Payment & Shipping Terms:
|
X,Y Axis: | With Servo Device And Touch Screen | Turning Material: | Commutator Copper Or Rotor Aluminum |
---|---|---|---|
Turning Belt: | Different Turning Belt For Commutator OD And Rotor OD | Can Install Setting: | Can't Install Setting Because Cutter Initial Positiong Is Needed |
Washing Machine Induction Motor Rotor Outside Diameter Armature Surface Turning WIND-CT-TH3
Application:
The lathe turning machine WIND-CT-TH3 is precision equipment for turning the external OD of coomutator
or the excircle of rotor iron cores
Competitive Advantages:
1.Advanced design, appealing design and excellent performance
2. One servo control the turning
3. Main parts adopt imported prats
4. Machine have high efficiency and strong rliability
Specification:
Roundness: | ≦0.003mm |
Surface roughness: | ≦Ra0.40 |
Rotor outer diameter: | Ф20-Ф100mm |
Rotor shaft length: | 32-250mm |
Rotor shaft diameter: | Ф3-Ф22mm |
Commutator outer diameter: | Ф4.3-Ф50mm |
Turning capability: | rough turning Max0.20mm diameter |
Speed amplitude modulation: | 0-60Hz |
Feeding unit: | 1μm-0.5mm arbitrary |
Cutting length: | Max80mm |
Feeding speed: | Stepless adjustable |
Control mode: | stepping, automatic |
Operation method: | Touch screen operation |
Air source pressure: | 5-7kg/cm² |
Turning times: | 1-4 Any setting |
Fixture: | Diamond V-shaped Frame |
Total power: | 2.5Kw |
Power source: | AC220V 50/60Hz |
Weight: | about 500Kg |
Dimensions: | 1100×850×1800mm³ |
Diamond Turning Tool advantages:
1. Comapring to Alloy CNC turning tool (carbide), turning machine's diamond tool is advanced,
Diamond turning tool is what most Chinese motor manufacturers are using as diamond tool
can achieve better shining and micro finish after lathing and turning the copper surface
Alloy CNC turning tool carbide is only suitable for aluminum iron alloy surface product turning
2. The holding device of turning machine WIND-CT-TH3B for holding your Rotor OD have
two side ball bearing device which prevent shaft from wear
3. There was a German customer who used this device for over 10year in German and Austria,
and still purchase the diamond turning tool from us
The lathe machine is designed to finish turn the rotor outside diameter and commutator brush track
area of relatively small fractional horsepower motor armatures, starter armatures commutator,
Turning of the commutator brush track area is accomplished through the use of a diamond-tipped
tool mounted onto a precision machine slide driven by a Delta A.C. servo motor,
turning and milling the surface of aluminum rotor and commutator copper to let it polish and shining,
Contact: emily@motor-machinery.com
Skype: motor.machinery
Mobile: +86-18067425780
Website: http://www.motor-machinery.com; http://www.statorwindingmachine.com
Commutator turning riser surface lathing machine WIND-CT-TH4 from EmilyGao of coils winding supply on Vimeo.
Contact Person: Ms. Emily
Tel: 86-18019121458