Shanghai Wind Automation Equipment Co.,Ltd 

Sales & Support
Request A Quote - Email
Select Language
English
Italian
Russian
Portuguese
Arabic
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsParts of machinery and motor

Starter Commutator Slotting Machine

We are very happy with the machines!

—— Efrain.Alvarado

We trust you and have very good references of you from our Shanghai colleagues

—— Olayo Delgado

Thank you so much!

—— Alain Vadrot

I think the segments look great, excellent layering

—— Paul

I'm Online Chat Now

Starter Commutator Slotting Machine

China Starter Commutator Slotting Machine supplier
Starter Commutator Slotting Machine supplier Starter Commutator Slotting Machine supplier Starter Commutator Slotting Machine supplier

Large Image :  Starter Commutator Slotting Machine

Product Details:

Detailed Product Description

Singlechip Control Motor Armature Commutator Mica Wire Slotting Machine

 

 

 

(1) Technical Data

 

Voltage: three phase 380 V,50Hz

 

Air source: 0.4 to 0.75MPa

 

Motor power: 1.1kw

 

Commutator OD range from 5mm to 130mm

 

Speed: 2800RPM

 

Capability in one shift: 1200 pcs

 

Slot range: 2 to 99 slot

 

 

 

(2) Competitive Advantages

 

The commutator slotting machine can handle commutator type with slotted type and hook type

 

commutator with OD range from 5mm to 130mm

 

 

 

(3) Auomated or Semi auto device choise

 

For slotted type commutator without riser, automated system is suitable,

 

For hook type commutator, slotting process is before bend the hook end

 

 

 

(4) Attention points

 

During the commutator slotting process, splashed copper chips are mixed in the air around the controller.

 

These chips of copper cut the circuit board and components of the controller at all times and cause a

 

short circuit between the wires! If an abnormal situation occurs during work, immediately stop working and

 

switch off the power quickly. Then use 4-6kg / cm pressure of dry compressed air blow off the control

 

board and the drive board copper cutting powder, make sure the circuit board and components without

 

copper cutting powder, and then restart the work.

 

 

 

Touble shooting:

 

Question:

 

It appears that the new commutator slotter is malfunctioning and I believe it is a programming issue. The

 

unit has been used for production for 5 days until today. For some reason, the plc does not stop the saw

 

and plate inverter once the last cut has been made. How do we get support from Shanghai Wind to get

 

this issue resolved?

 

Answer:

 

Would you please take a long video to for us to check the problem ' plc does not stop the saw and plate

 

inverter once the last cut has been made'?

 

 

 

The issue is caused by signal interference, please follow below step to solve it,
 
1. Switch off the machine, wait for 1 minutes
 
2. Power on the machine
 
3. Press ▲ button for 5 seconds to machine intial setting
 
Starter Commutator Slotting Machine
 
 
 
You may take a photo of the screen for us to confirm after you go to the machine intial setting,
 
To start the operation again, please do the optical detection, below is the steps for 'Optical detection for
 
initial setting'
 
1. Press the second ⊙ round button
 
2. then press ▲ three times
 
3. and then press +
 
Starter Commutator Slotting Machine
 
 
 

Also there is a video for reference, IMG_5551 Optical detection for initial setting of new commutator type

https://youtu.be/d-U-1ajbiSw

 

Contact:emily@motor-machinery.com
Skype: motor.machinery
Mobile: +86-17721374887
Website: http://www.motor-machinery.com; http://www.coilswinding.com
Video: http://www.vimeo.com/coilswinding

 

Contact Details
Shanghai Wind Automation Equipment Co.,Ltd

Contact Person: Ms. Emily

Tel: 86-21-58992293

Send your inquiry directly to us (0 / 3000)