 |
|
|
|
Stator Powder Coating Equipment Stator Hot Dip Insulation
Product Details:
Payment & Shipping Terms:
|
Detailed Product Description
Stator Powder Coating Equipment Stator Hot Dip Insulation
1. Machine is composed of heating,powder coating,powder cleaner and
powder recycle system with nice appearance and reasonable configuration,
the machine frame is made of 1.2mm A3 steel plate,
2. High frequency indution heater have the advantage of fast heating,
low energy, safety and reliability
3. Air blowing ensure well done in cleaning fixtures
4. Cooling on high frequency induction heater is freezing style water cooler
tank, it is well cooling
IV Machine configuration
Machine dimension L2100×W1720×H2100 mm
1. 40KW high frequency induction heater 1PC
With Φ120mm inductorium 1PC
2. Cooling tank 1PC
With size L1000×W1000×H1000mm
3. 0.37KW Cooling water pump
4. Powder coating chamber 1SET
5. Powder recycle system (on back side of powder coating chamber) 1PC
V Power composition
Power : 12KW 380V±10%,50HZ
Compressed air : 0.3 m³/min 0.6Mpa
Video:
https://vimeo.com/128549762
Contact:Emily
Email:emily@motor-machinery.com
Skype: motor.machinery
Mobile: +86-18067425780
Contact Details
Other Products
-
Winding BLDC Stator Four Pole Shaded Stator Winder 4 Poles Arm Needle Winding Machine
-
Ventilador Ocilante Table Fan Pump Compressor Stator Automatic Coil Winding Making Motor Manufacturing Machine
-
Motorcycle Magneto Engine Generator Stator Winding Machine Coil Winder WIND-MW-4
-
Three Needle BLDC Stator Winding Machine Segment Muti 6, 9,12 Poles Stator Segments Winder
-
Coil Forming Machine For Pump Compressor WIND-160-HW
-
Insulation Band Paper Nomex Forming And Cutting Polyester Film NPN DMD Pump Isolation